Annotation of telnetbbs/dosbox.conf.template, revision 1.1
1.1 ! nick 1: # This is the configurationfile for DOSBox 0.72.
! 2: # Lines starting with a # are commentlines.
! 3: # They are used to (briefly) document the effect of each option.
! 4:
! 5: [sdl]
! 6: # fullscreen -- Start dosbox directly in fullscreen.
! 7: # fulldouble -- Use double buffering in fullscreen.
! 8: # fullresolution -- What resolution to use for fullscreen: original or fixed size (e.g. 1024x768).
! 9: # windowresolution -- Scale the window to this size IF the output device supports hardware scaling.
! 10: # output -- What to use for output: surface,overlay,opengl,openglnb.
! 11: # autolock -- Mouse will automatically lock, if you click on the screen.
! 12: # sensitiviy -- Mouse sensitivity.
! 13: # waitonerror -- Wait before closing the console if dosbox has an error.
! 14: # priority -- Priority levels for dosbox: lowest,lower,normal,higher,highest,pause (when not focussed).
! 15: # Second entry behind the comma is for when dosbox is not focused/minimized.
! 16: # mapperfile -- File used to load/save the key/event mappings from.
! 17: # usescancodes -- Avoid usage of symkeys, might not work on all operating systems.
! 18:
! 19: fullscreen=false
! 20: fulldouble=false
! 21: fullresolution=original
! 22: windowresolution=original
! 23: output=surface
! 24: autolock=true
! 25: sensitivity=100
! 26: waitonerror=true
! 27: priority=higher,normal
! 28: mapperfile=mapper.txt
! 29: usescancodes=true
! 30:
! 31: [dosbox]
! 32: # language -- Select another language file.
! 33: # memsize -- Amount of memory DOSBox has in megabytes.
! 34: # machine -- The type of machine tries to emulate:hercules,cga,tandy,pcjr,vga.
! 35: # captures -- Directory where things like wave,midi,screenshot get captured.
! 36:
! 37: language=
! 38: machine=vga
! 39: captures=capture
! 40: memsize=4
! 41:
! 42: [render]
! 43: # frameskip -- How many frames DOSBox skips before drawing one.
! 44: # aspect -- Do aspect correction, if your output method doesn't support scaling this can slow things down!.
! 45: # scaler -- Scaler used to enlarge/enhance low resolution modes.
! 46: # Supported are none,normal2x,normal3x,advmame2x,advmame3x,hq2x,hq3x,
! 47: # 2xsai,super2xsai,supereagle,advinterp2x,advinterp3x,
! 48: # tv2x,tv3x,rgb2x,rgb3x,scan2x,scan3x.
! 49: # If forced is appended (like scaler=hq2x forced), the scaler will be used
! 50: # even if the result might not be desired.
! 51:
! 52: frameskip=0
! 53: aspect=false
! 54: scaler=none
! 55:
! 56: [cpu]
! 57: # core -- CPU Core used in emulation: normal,simple,dynamic,auto.
! 58: # auto switches from normal to dynamic if appropriate.
! 59: # cycles -- Amount of instructions DOSBox tries to emulate each millisecond.
! 60: # Setting this value too high results in sound dropouts and lags.
! 61: # You can also let DOSBox guess the correct value by setting it to max.
! 62: # The default setting (auto) switches to max if appropriate.
! 63: # cycleup -- Amount of cycles to increase/decrease with keycombo.
! 64: # cycledown Setting it lower than 100 will be a percentage.
! 65:
! 66: core=auto
! 67: cycles=auto
! 68: cycleup=500
! 69: cycledown=20
! 70:
! 71: [mixer]
! 72: # nosound -- Enable silent mode, sound is still emulated though.
! 73: # rate -- Mixer sample rate, setting any devices higher than this will
! 74: # probably lower their sound quality.
! 75: # blocksize -- Mixer block size, larger blocks might help sound stuttering
! 76: # but sound will also be more lagged.
! 77: # prebuffer -- How many milliseconds of data to keep on top of the blocksize.
! 78:
! 79: nosound=true
! 80: rate=22050
! 81: blocksize=2048
! 82: prebuffer=10
! 83:
! 84: [midi]
! 85: # mpu401 -- Type of MPU-401 to emulate: none, uart or intelligent.
! 86: # device -- Device that will receive the MIDI data from MPU-401.
! 87: # This can be default,alsa,oss,win32,coreaudio,none.
! 88: # config -- Special configuration options for the device. In Windows put
! 89: # the id of the device you want to use. See README for details.
! 90:
! 91: mpu401=intelligent
! 92: device=default
! 93: config=
! 94:
! 95: [sblaster]
! 96: # sbtype -- Type of sblaster to emulate:none,sb1,sb2,sbpro1,sbpro2,sb16.
! 97: # sbbase,irq,dma,hdma -- The IO/IRQ/DMA/High DMA address of the soundblaster.
! 98: # mixer -- Allow the soundblaster mixer to modify the DOSBox mixer.
! 99: # oplmode -- Type of OPL emulation: auto,cms,opl2,dualopl2,opl3.
! 100: # On auto the mode is determined by sblaster type.
! 101: # All OPL modes are 'Adlib', except for CMS.
! 102: # oplrate -- Sample rate of OPL music emulation.
! 103:
! 104: sbtype=false
! 105: sbbase=220
! 106: irq=7
! 107: dma=1
! 108: hdma=5
! 109: mixer=true
! 110: oplmode=auto
! 111: oplrate=22050
! 112:
! 113: [gus]
! 114: # gus -- Enable the Gravis Ultrasound emulation.
! 115: # gusbase,irq1,irq2,dma1,dma2 -- The IO/IRQ/DMA addresses of the
! 116: # Gravis Ultrasound. (Same IRQ's and DMA's are OK.)
! 117: # gusrate -- Sample rate of Ultrasound emulation.
! 118: # ultradir -- Path to Ultrasound directory. In this directory
! 119: # there should be a MIDI directory that contains
! 120: # the patch files for GUS playback. Patch sets used
! 121: # with Timidity should work fine.
! 122:
! 123: gus=false
! 124: gusrate=22050
! 125: gusbase=240
! 126: irq1=5
! 127: irq2=5
! 128: dma1=3
! 129: dma2=3
! 130: ultradir=C:\ULTRASND
! 131:
! 132: [speaker]
! 133: # pcspeaker -- Enable PC-Speaker emulation.
! 134: # pcrate -- Sample rate of the PC-Speaker sound generation.
! 135: # tandy -- Enable Tandy Sound System emulation (off,on,auto).
! 136: # For auto Tandysound emulation is present only if machine is set to tandy.
! 137: # tandyrate -- Sample rate of the Tandy 3-Voice generation.
! 138: # disney -- Enable Disney Sound Source emulation. Covox Voice Master and Speech Thing compatible.
! 139:
! 140: pcspeaker=true
! 141: pcrate=22050
! 142: tandy=auto
! 143: tandyrate=22050
! 144: disney=true
! 145:
! 146: [joystick]
! 147: # joysticktype -- Type of joystick to emulate: auto (default), none,
! 148: # 2axis (supports two joysticks,
! 149: # 4axis (supports one joystick, first joystick used),
! 150: # 4axis_2 (supports one joystick, second joystick used),
! 151: # fcs (Thrustmaster), ch (CH Flightstick).
! 152: # none disables joystick emulation.
! 153: # auto chooses emulation depending on real joystick(s).
! 154: # timed -- enable timed intervals for axis. (false is old style behaviour).
! 155: # autofire -- continuously fires as long as you keep the button pressed.
! 156: # swap34 -- swap the 3rd and the 4th axis. can be useful for certain joysticks.
! 157: # buttonwrap -- enable button wrapping at the number of emulated buttons.
! 158:
! 159: joysticktype=auto
! 160: timed=true
! 161: autofire=false
! 162: swap34=false
! 163: buttonwrap=true
! 164:
! 165: [serial]
! 166: # serial1-4 -- set type of device connected to com port.
! 167: # Can be disabled, dummy, modem, nullmodem, directserial.
! 168: # Additional parameters must be in the same line in the form of
! 169: # parameter:value. Parameter for all types is irq.
! 170: # for directserial: realport (required), rxdelay (optional).
! 171: # for modem: listenport (optional).
! 172: # for nullmodem: server, rxdelay, txdelay, telnet, usedtr,
! 173: # transparent, port, inhsocket (all optional).
! 174: # Example: serial1=modem listenport:5000
! 175:
! 176: serial1=modem listenport:__LISTEN_PORT__
! 177: serial2=dummy
! 178: serial3=disabled
! 179: serial4=disabled
! 180:
! 181: [dos]
! 182: # xms -- Enable XMS support.
! 183: # ems -- Enable EMS support.
! 184: # umb -- Enable UMB support.
! 185: # keyboardlayout -- Language code of the keyboard layout (or none).
! 186:
! 187: xms=true
! 188: ems=true
! 189: umb=true
! 190: keyboardlayout=none
! 191:
! 192: [ipx]
! 193: # ipx -- Enable ipx over UDP/IP emulation.
! 194:
! 195: ipx=false
! 196:
! 197: [autoexec]
! 198: # Lines in this section will be run at startup.
! 199: mount c: /home/nick/hdbbs
! 200: c:
! 201: PATH=c:\;c:\util
! 202: #cd bnu
! 203: #bnu
! 204: #cd ..\bbs
! 205: cd c:\foss
! 206: fci
! 207: cd c:\bbs
! 208: renegade /N__NODE__ -Q
! 209: #renegade /N1 -Q -B115200
! 210: exit
FreeBSD-CVSweb <freebsd-cvsweb@FreeBSD.org>
![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to dosbox.conf.template CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [Local Repository] / telnetbbs